KXR Heated desiccant air dryer-HANGZHOU KELIN QIYUAN EQUIPMENT CO.,LTD.

Products

+86-0571-88791018

KXR Heated desiccant air dryer

KXR Series heated regenerated air dryer includes an external electrical heater to heat dry purge air for desiccant regeneration. Heating allows the dryers to consume only 6% of the dried compressed air volume for this purpose – significantly less than is required for heatless air dryers. The flow capacity is available from 0.7 to 510m3/min,the outlet pressure dew point is - 40 deg c .

QUOTE NOW

PRODUCT DESCRIPTION

Standard operating conditions

Normal inlet pressure: 7 bar(g),

Normal inlet temperature : 35°C

Pressure dew point: -40°C

Maximum operating pressure: 10bar

Minimum operating pressure: 4bar

Maximum inlet temperature: 50°C

Minimum inlet temperature: 10°C

Standard electrical supply: 380V/3Ph/50Hz

Model	Flow Capacity		Heater (kw)	Dimensions			Air Conn.	Weight
Model	m3/min	CFM	Heater (kw)	L(mm)	W(mm)	H(mm)	(BSP)	(kg)
KXR-5	0.7	25	0.9	690	500	915	1/2”	120
KXR-10	1.6	56	0.9	690	500	1298	1”	190
KXR-20	2.6	92	1.5	780	500	1324	1”	280
KXR-30	3.8	134	1.5	860	540	1350	1”	320
KXR-60	7.0	247	2.4	1010	700	1558	1 1/2”	480
KXR-75	8.5	300	2.4	1010	700	1785	1 1/2”	540
KXR-100	11.5	406	4.5	1240	800	2232	2”	650
KXR-120	13	476	4.5	1240	800	2232	2”	690
KXR-150	17	600	5.4	1280	860	2360	DN65	780
KXR-200	23	812	7.5	1320	860	2477	DN65	920

Flow capacity is based the following conditions:

air FAD 20°C/1 barA, pressure 7 bar(g), relative humidity 100%,

air inlet temperature 35°C, pressure dew point -40°C

Inlet Air Pressure Correction- C1

bar g	4.0	5.0	6.0	7.0	8.0	9.0	10	11	12	13	14
Factor	0.62	0.77	0.9	1.0	1.09	1.19	1.24	1.31	1.37	1.42	1.47

Inlet Air Temperature Correction- C2

bar g	25	30	35	40	45	50
Factor	1.12	1.06	1.0	0.93	0.86	0.78

Example Calculations:

KXR-120 corrected for 8 bar + 40℃

Corrected Capacity=Rated Capacity x C1 xC1=13.5Nm3/minx1.09x0.93=13.77Nm3/min

Web Menu

Product Search

Language

Exit Menu